|
|
|
@ -0,0 +1,40 @@ |
|
|
|
{ |
|
|
|
"mac_address": "10:52:1c:51:0e:84",? The device knows this anyway |
|
|
|
"name": "Industrial",? This is managed at the server is it not? |
|
|
|
"pcb_version": "4.0",? Why does the firmware need to know this? |
|
|
|
"analogue_ports": 4,? Same as above, we will only push the correct number of sensor settings to the board. |
|
|
|
"digital_ports": 2,? "" |
|
|
|
"adc": "ADC128S022",? Won't the below adc settings take care of this? |
|
|
|
"adc_miso": 19, |
|
|
|
"adc_mosi": 23, |
|
|
|
"adc_clk": 18, |
|
|
|
"adc_cs": 5, |
|
|
|
"upload_interval": 15, |
|
|
|
"address": "mqtt.senseright.com.au", |
|
|
|
"port": 1884, |
|
|
|
"ota_path": null, |
|
|
|
"mqtt_secondary_address": "mqtt.senseright.com.au", |
|
|
|
"mqtt_secondary_port": 1884, |
|
|
|
"sensors": [ ! We need to sit down and define what settings and naming we are using for all our current sensors so this is fully defined. |
|
|
|
{ |
|
|
|
"port_type": "Analogue", ! This will define how and what settings we look for below. |
|
|
|
"port": 1, |
|
|
|
"sensor_type": "0-5m pressure transducer", ! This should be a lot shorter as we will use this for control flow. For example "Pressure1", we would just keep a list of what key means what device. |
|
|
|
"sensor_address": null, |
|
|
|
"read_interval": 15, |
|
|
|
"communication_type": "4-20mA", ? Does this change how we should read the device |
|
|
|
"daughterboard": "4-20", ? "" |
|
|
|
"pcb_version": "1.0" ? "" |
|
|
|
}, |
|
|
|
{ |
|
|
|
"port_type": "Analogue", |
|
|
|
"port": 2, |
|
|
|
"sensor_type": "0-5m pressure transducer", |
|
|
|
"sensor_address": null, |
|
|
|
"read_interval": 15, |
|
|
|
"communication_type": "4-20mA", |
|
|
|
"daughterboard": "4-20", |
|
|
|
"pcb_version": "1.0" |
|
|
|
} |
|
|
|
] |
|
|
|
} |
