|
|
- 
-
- A small Arduino library for GSM modules, that just works.
- <!---
- [](https://github.com/vshymanskyy/TinyGSM/releases/latest)--->
- [](https://github.com/vshymanskyy/TinyGSM/releases/latest)
- [](https://travis-ci.org/vshymanskyy/TinyGSM)
- [](https://github.com/vshymanskyy/TinyGSM/issues)
- [](https://github.com/vshymanskyy/TinyGSM/wiki)
- [](https://github.com/vshymanskyy/TinyGSM/stargazers)
- [](https://github.com/vshymanskyy/TinyGSM/blob/master/LICENSE)
-
- If you like **TinyGSM** - give it a star, or fork it and contribute!
- [](https://github.com/vshymanskyy/TinyGSM/stargazers)
- [](https://github.com/vshymanskyy/TinyGSM/network)
-
- You can also join our chat:
- [](https://gitter.im/tinygsm)
-
- ### Arduino Client interface support
- This library is easy to integrate with lots of sketches, which use Ethernet or WiFi.
- **PubSubClient ([MQTT](http://mqtt.org/))**, **[Blynk](http://blynk.cc)**, **HTTP Client** and **File Download** examples are provided.
-
- 
-
- ### TinyGSM is tiny
- The complete WebClient example for Arduino Uno (via Software Serial) takes little resources:
- ```
- Sketch uses 14094 bytes (43%) of program storage space. Maximum is 32256 bytes.
- Global variables use 625 bytes (30%) of dynamic memory, leaving 1423 bytes for local variables. Maximum is 2048 bytes.
- ```
- Arduino GSM library uses 15868 bytes (49%) of Flash and 1113 bytes (54%) of RAM in a similar scenario.
- TinyGSM also pulls data gently from the modem (whenever possible), so it can operate on very little RAM.
- **Now, you have more space for your experiments.**
-
- ## Features
-
- Feature \ Modem | SIM800 | SIM8x8 | A6/A7/A20 | M590 | ESP8266
- --- | --- | --- | --- | --- | ---
- **Data connections**
- TCP (HTTP, MQTT, Blynk, ...) | ✔ | ✔ | ✔ | ✔ | ✔
- UDP | | | | |
- SSL/TLS (HTTPS) | ✔¹ | ✔¹ | 🅧 | 🅧 | ◌
- **USSD**
- Sending USSD requests | ✔ | ✔ | ✔ | ✔ |
- Decoding 7,8,16-bit response | ✔ | ✔ | ✔ | ✔ |
- **SMS**
- Sending | ✔ | ✔ | ✔ | ✔ |
- Sending Unicode | ✔ | ✔ | ◌ | 🅧 |
- Reading | | | | |
- Incoming message event | | | | ? |
- **Calls**
- Dial, hangup | ✔ | ✔ | ✔ | 🅧 |
- Receiving calls | ✔ | ✔ | ✔ | 🅧 |
- Incoming event (RING) | ◌ | ◌ | ◌ | 🅧 |
- DTMF sending | ◌ | ◌ | ◌ | 🅧 |
- DTMF decoding | ◌ | ◌ | 🅧 | 🅧 |
- **Location**
- GSM location service | ✔ | ✔ | 🅧 | 🅧 |
- GPS/GNSS | 🅧 | ✔² | ◌¹ | 🅧 |
-
- ✔ - implemented ◌ - planned 🅧 - not available for this modem
- ¹ - only some device models or firmware revisions have this feature
- ² - current implementation only supports SIM808 V2 GPS
-
- ## Supported modems
-
- - [x] SIMCom SIM800 series (SIM800A, SIM800C, SIM800L, SIM800H, SIM808, SIM868)
- - [x] SIMCom SIM900 series (SIM900A, SIM900D, SIM908, SIM968)
- - [x] AI-Thinker A6, A6C, A7
- - [x] Neoway M590
- - [x] ESP8266 (AT commands interface, similar to GSM modems)
-
- ### Supported modules
- - [x] GPRSbee
- - [x] Microduino GSM
- - [x] Adafruit FONA (Mini Cellular GSM Breakout)
- - [x] Adafruit FONA 800/808 Shield
- - [x] ... other modules based on supported modems
-
- More modems may be supported later:
- - [ ] Hi-Link HLK-RM04
- - [ ] Quectel M10, M95, UG95
- - [ ] SIMCom SIM5320, SIM5216
- - [ ] Telit GL865
- - [ ] ZTE MG2639
-
- Watch this repo for new updates! And of course, contributions are welcome ;)
-
- ## Donation
-
- [](https://salt.bountysource.com/checkout/amount?team=tinygsm-dev)
- [](http://tny.im/aen)
-
- If you have found TinyGSM to be useful in your work, research or company, please consider making a donation to the project commensurate with your resources. Any amount helps!
- **All donations will be used strictly to fund the development of TinyGSM:**
- - Covering cellular network expences
- - Buying new hardware and modems for integration
- - Bounty Budget (to reward other developers for their contributions)
- - Implementing new features
- - Quality Assurance
-
- ## Getting Started
-
- 1. Using your phone:
- - Disable PIN code on the SIM card
- - Check your ballance
- - Check that APN,User,Pass are correct and you have internet
- 2. Ensure the SIM card is correctly inserted into the module
- 3. Provide a good, [stable power supply](https://github.com/vshymanskyy/TinyGSM/wiki/Powering-GSM-module) (up to 2A and specific voltage according to your module documentation)
- 4. Check if serial connection is working (Hardware Serial is recommended)
- Send an ```AT``` command using [this sketch](tools/AT_Debug/AT_Debug.ino)
- 5. Check if GSM antenna is attached
-
- ## How does it work?
-
- Many GSM modems, WiFi and radio modules can be controlled by sending AT commands over Serial.
- TinyGSM knows which commands to send, and how to handle AT responses, and wraps that into standard Arduino Client interface.
-
- ## API Reference
-
- For GPRS data streams, this library provides the standard [Arduino Client](https://www.arduino.cc/en/Reference/ClientConstructor) interface.
- For additional functions, please refer to [this example sketch](examples/AllFunctions/AllFunctions.ino)
-
- ## Troubleshooting
-
- ### SoftwareSerial problems
-
- When using ```SoftwareSerial``` (on Uno, Nano, etc), the speed **115200** may not work.
- Try selecting **57600**, **38400**, or even lower - the one that works best for you.
- Be sure to set correct TX/RX pins in the sketch. Please note that not every Arduino pin can serve as TX or RX pin.
- **Read more about SoftSerial options and configuration [here](https://www.pjrc.com/teensy/td_libs_AltSoftSerial.html) and [here](https://www.arduino.cc/en/Reference/SoftwareSerial).**
-
- ### Diagnostics sketch
-
- Use this sketch to diagnose your SIM card and GPRS connection:
- File -> Examples -> TynyGSM -> tools -> [Diagnostics](https://github.com/vshymanskyy/TinyGSM/blob/master/tools/Diagnostics/Diagnostics.ino)
-
- ### Broken initial configuration
-
- Sometimes (especially if you played with AT comands), your module configuration may become invalid.
- This may result in problems such as:
-
- * Can't connect to the GPRS network
- * Can't connect to the server
- * Sent/recieved data contains invalid bytes
- * etc.
-
- To return module to **Factory Defaults**, use this sketch:
- File -> Examples -> TynyGSM -> tools -> [FactoryReset](https://github.com/vshymanskyy/TinyGSM/blob/master/tools/FactoryReset/FactoryReset.ino)
-
- __________
-
- ### License
- This project is released under
- The GNU Lesser General Public License (LGPL-3.0)
|
