TinyGSM_Senseright/examples/FileDownload/FileDownload.ino

/**************************************************************
 *
 * For this example, you need to install CRC32 library:
 *   https://github.com/vshymanskyy/CRC32.git
 *   or from http://librarymanager/all#CRC32+checksum
 *
 * TinyGSM Getting Started guide:
 *   http://tiny.cc/tiny-gsm-readme
 *
 **************************************************************/

#include <TinyGsmClient.h>
#include <CRC32.h>

// Your GPRS credentials
// Leave empty, if missing user or pass
char apn[]  = "YourAPN";
char user[] = "";
char pass[] = "";

// Use Hardware Serial on Mega, Leonardo, Micro
#define GsmSerial Serial1

// or Software Serial on Uno, Nano
//#include <SoftwareSerial.h>
//SoftwareSerial GsmSerial(2, 3); // RX, TX

TinyGsmClient client(GsmSerial);

char server[] = "cdn.rawgit.com";
char resource[] = "/vshymanskyy/tinygsm/master/extras/test_10k.hex";
uint32_t knownCRC32 = 0x54b3dcbf;
uint32_t knownFileSize = 10240;   // In case server does not send it

void setup() {
  // Set console baud rate
  Serial.begin(115200);
  delay(10);

  // Set GSM module baud rate
  GsmSerial.begin(115200);
  delay(3000);

  // Restart takes quite some time
  // You can skip it in many cases
  Serial.println("Restarting modem...");
  client.restart();
}

void printPercent(uint32_t readLength, uint32_t contentLength) {
  // If we know the total length
  if (contentLength != -1) {
    Serial.print(F("\r "));
    Serial.print((100.0 * readLength) / contentLength);
    Serial.println('%');
  } else {
    Serial.println(readLength);
  }
}

void loop() {
  Serial.print("Connecting to ");
  Serial.print(apn);
  if (!client.networkConnect(apn, user, pass)) {
    Serial.println(" failed");
    delay(10000);
    return;
  }
  Serial.println(" OK");

  Serial.print("Connecting to ");
  Serial.print(server);

  // if you get a connection, report back via serial:
  if (!client.connect(server, 80)) {
    Serial.println(" failed");
    delay(10000);
    return;
  }
  Serial.println(" OK");
  // Make a HTTP request:
  client.print(String("GET ") + resource + " HTTP/1.0\r\n");
  client.print(String("Host: ") + server + "\r\n");
  client.print("Connection: close\r\n\r\n");

  long timeout = millis();
  while (client.available() == 0) {
    if (millis() - timeout > 5000L) {
      Serial.println(">>> Client Timeout !");
      client.stop();
      delay(10000L);
      return;
    }
  }

  Serial.println("Reading response header");
  uint32_t contentLength = knownFileSize;

  while (client.available()) {
    String line = client.readStringUntil('\n');
    line.trim();
    //Serial.println(line);    // Uncomment this to show response header
    line.toLowerCase();
    if (line.startsWith("content-length:")) {
      contentLength = line.substring(line.lastIndexOf(':') + 1).toInt();  
    } else if (line.length() == 0) {
      break;
    }
  }

  Serial.println("Reading response data");
  timeout = millis();
  uint32_t readLength = 0;
  CRC32 crc;

  unsigned long timeElapsed = millis();
  printPercent(readLength, contentLength);
  while (readLength < contentLength && client.connected() && millis() - timeout < 10000L) {
    while (client.available()) {
      uint8_t c = client.read();
      //Serial.print((char)c);       // Uncomment this to show data
      crc.update(c);
      readLength++;
      if (readLength % (contentLength / 13) == 0) {
        printPercent(readLength, contentLength);
      }
      timeout = millis();
    }
  }
  printPercent(readLength, contentLength);
  timeElapsed = millis() - timeElapsed;
  Serial.println();

  client.stop();
  Serial.println("Server disconnected");

  client.networkDisconnect();
  Serial.println("GPRS disconnected");
  Serial.println();

  float timeSpent = float(timeElapsed) / 1000;
  float theorLimit = ((8.0 * readLength) / 85.6) / 1000;

  Serial.print("Content-Length: ");   Serial.println(contentLength);
  Serial.print("Actually read:  ");   Serial.println(readLength);
  Serial.print("Calc. CRC32:    0x"); Serial.println(crc.finalize(), HEX);
  Serial.print("Known CRC32:    0x"); Serial.println(knownCRC32, HEX);
  Serial.print("Time spent:     ");   Serial.print(timeSpent); Serial.println("s");
  Serial.print("85.6kBps limit: ");   Serial.print(theorLimit); Serial.println("s");

  // Do nothing forevermore
  while (true) {
    delay(1000);
  }
}