Bad smudge, examples are supposed to auto-baud

Signed-off-by: Sara Damiano <sdamiano@stroudcenter.org>

README.md

@@ -201,6 +201,7 @@ The general flow of your code should be:
     - Secure and insecure clients can usually be mixed when using multiple connections.
     - The total number of connections possible varies by module
 - Begin your serial communication and set all your pins as required to power your module and bring it to full functionality.
+    - The examples attempt to guess the module's baud rate.  In working code, you should use a set baud.
 - Wait for the module to be ready (could be as much as 6s, depending on the module)
 - Initialize the modem
     - ```modem.init()``` or ```modem.restart()```

examples/AllFunctions/AllFunctions.ino

@@ -137,8 +137,8 @@ void setup() {
   delay(6000);
 
   // Set GSM module baud rate
-  // TinyGsmAutoBaud(SerialAT, GSM_AUTOBAUD_MIN, GSM_AUTOBAUD_MAX);
-  SerialAT.begin(9600);
+  TinyGsmAutoBaud(SerialAT, GSM_AUTOBAUD_MIN, GSM_AUTOBAUD_MAX);
+  // SerialAT.begin(9600);
 }
 
 void loop() {

examples/HttpClient/HttpClient.ino

@@ -133,8 +133,8 @@ void setup() {
   SerialMon.println("Wait...");
 
   // Set GSM module baud rate
-  // TinyGsmAutoBaud(SerialAT,GSM_AUTOBAUD_MIN,GSM_AUTOBAUD_MAX);
-  SerialAT.begin(9600);
+  TinyGsmAutoBaud(SerialAT, GSM_AUTOBAUD_MIN, GSM_AUTOBAUD_MAX);
+  // SerialAT.begin(9600);
   delay(6000);
 
   // Restart takes quite some time

examples/HttpsClient/HttpsClient.ino

@@ -125,8 +125,8 @@ void setup() {
   SerialMon.println("Wait...");
 
   // Set GSM module baud rate
-  // TinyGsmAutoBaud(SerialAT,GSM_AUTOBAUD_MIN,GSM_AUTOBAUD_MAX);
-  SerialAT.begin(9600);
+  TinyGsmAutoBaud(SerialAT, GSM_AUTOBAUD_MIN, GSM_AUTOBAUD_MAX);
+  // SerialAT.begin(9600);
   delay(6000);
 
   // Restart takes quite some time

examples/MqttClient/MqttClient.ino

@@ -177,8 +177,8 @@ void setup() {
   SerialMon.println("Wait...");
 
   // Set GSM module baud rate
-  // TinyGsmAutoBaud(SerialAT,GSM_AUTOBAUD_MIN,GSM_AUTOBAUD_MAX);
-  SerialAT.begin(9600);
+  TinyGsmAutoBaud(SerialAT, GSM_AUTOBAUD_MIN, GSM_AUTOBAUD_MAX);
+  // SerialAT.begin(9600);
   delay(6000);
 
   // Restart takes quite some time

examples/WebClient/WebClient.ino

@@ -128,8 +128,8 @@ void setup() {
   SerialMon.println("Wait...");
 
   // Set GSM module baud rate
-  // TinyGsmAutoBaud(SerialAT,GSM_AUTOBAUD_MIN,GSM_AUTOBAUD_MAX);
-  SerialAT.begin(9600);
+  TinyGsmAutoBaud(SerialAT, GSM_AUTOBAUD_MIN, GSM_AUTOBAUD_MAX);
+  // SerialAT.begin(9600);
   delay(6000);
 
   // Restart takes quite some time

tools/Diagnostics/Diagnostics.ino

@@ -128,8 +128,8 @@ void setup() {
   SerialMon.println("Wait...");
 
   // Set GSM module baud rate
-  // TinyGsmAutoBaud(SerialAT,GSM_AUTOBAUD_MIN,GSM_AUTOBAUD_MAX);
-  SerialAT.begin(9600);
+  TinyGsmAutoBaud(SerialAT, GSM_AUTOBAUD_MIN, GSM_AUTOBAUD_MAX);
+  // SerialAT.begin(9600);
   delay(6000);
 }