diff --git a/examples/SIM7000-ESP32/AllFunctions/AllFunctions.ino b/examples/SIM7000-ESP32/AllFunctions/AllFunctions.ino deleted file mode 100644 index 281a0f8..0000000 --- a/examples/SIM7000-ESP32/AllFunctions/AllFunctions.ino +++ /dev/null @@ -1,199 +0,0 @@ -/************************************************************** - * - * TinyGSM Getting Started guide: - * https://tiny.cc/tinygsm-readme - * - * NOTE: - * Some of the functions may be unavailable for your modem. - * Just comment them out. - * - **************************************************************/ - -// Select your modem: -//#define TINY_GSM_MODEM_SIM800 -// #define TINY_GSM_MODEM_SIM808 -// #define TINY_GSM_MODEM_SIM900 -#define TINY_GSM_MODEM_SIM7000 -// #define TINY_GSM_MODEM_UBLOX -// #define TINY_GSM_MODEM_BG96 -// #define TINY_GSM_MODEM_A6 -// #define TINY_GSM_MODEM_A7 -// #define TINY_GSM_MODEM_M590 - -// Set serial for debug console (to the Serial Monitor, speed 115200) -#define SerialMon Serial - -// Set serial for AT commands (to the module) -// Use Hardware Serial on Mega, Leonardo, Micro, ESP32 -#include "HardwareSerial.h" -#define SerialAT Serial2 - -// or Software Serial on Uno, Nano -//#include -//SoftwareSerial SerialAT(2, 3); // RX, TX - -#define MODEM_PWRKEY 18 -//#define DUMP_AT_COMMANDS -#define TINY_GSM_DEBUG SerialMon - -// Set phone numbers, if you want to test SMS and Calls -//#define SMS_TARGET "+4366066033403" -//#define CALL_TARGET "+43xxxxxx" - -// Your GPRS credentials -// Leave empty, if missing user or pass -const char apn[] = "drei.at"; -const char user[] = ""; -const char pass[] = ""; - -#include - -#ifdef DUMP_AT_COMMANDS - #include - StreamDebugger debugger(SerialAT, SerialMon); - TinyGsm modem(debugger); -#else - TinyGsm modem(SerialAT); - TinyGsmClient client(modem); -#endif - -void setup() { - // Set pwr pin 18 (ESP32) --> shield's PWRKEY - pinMode(MODEM_PWRKEY, OUTPUT); - powerOn(); //function for powering on SIM7000 - - // Set console baud rate - SerialMon.begin(115200); - delay(1000); - - SerialAT.begin(9600); - delay(1000); - // Set GSM module baud rate - //TinyGsmAutoBaud(SerialAT); -} - -void loop() { - - // Restart takes quite some time - // To skip it, call init() instead of restart() - DBG("Initializing modem..."); - if (!modem.restart()) { - delay(15000); - return; - } - - //String modemInfo = modem.getModemInfo(); - //DBG("Modem:", modemInfo); - - // Unlock your SIM card with a PIN - //modem.simUnlock("1234"); - - - // Network modes for SIM7000 (2-Automatic),(13-GSM Only),(38-LTE Only),(51-GSM And LTE Only) - String NetworkModes = modem.getNetworkModes(); - DBG("Network Modes:", NetworkModes); - - String NetworkMode = modem.setNetworkMode(0); - DBG("Changed Network Mode:", NetworkMode); - - // Preferred LTE mode selection (1-Cat-M),(2-NB-IoT),(3-Cat-M And NB-IoT) - String PreferredModes = modem.getPreferredModes(); - DBG("Preferred Modes:", PreferredModes); - - String PreferredMode = modem.setPreferredMode(3); - DBG("Changed Preferred Mode:", PreferredMode); - - -/* DBG("Waiting for network..."); - if (!modem.waitForNetwork()) { - delay(10000); - return; - } - - if (modem.isNetworkConnected()) { - DBG("Network connected"); - }*/ - -/* - DBG("Connecting to", apn); - if (!modem.gprsConnect(apn, user, pass)) { - delay(10000); - return; - } - - bool res = modem.isGprsConnected(); - DBG("GPRS status:", res ? "connected" : "not connected"); - - String ccid = modem.getSimCCID(); - DBG("CCID:", ccid); - - String imei = modem.getIMEI(); - DBG("IMEI:", imei); - - String cop = modem.getOperator(); - DBG("Operator:", cop); - - IPAddress local = modem.localIP(); - DBG("Local IP:", local); - - int csq = modem.getSignalQuality(); - DBG("Signal quality:", csq); - - // This is NOT supported on M590 - int battLevel = modem.getBattPercent(); - DBG("Battery lavel:", battLevel); - - // This is only supported on SIMxxx series - float battVoltage = modem.getBattVoltage() / 1000.0F; - DBG("Battery voltage:", battVoltage); - - // This is only supported on SIMxxx series - String gsmLoc = modem.getGsmLocation(); - DBG("GSM location:", gsmLoc); - - // This is only supported on SIMxxx series - String gsmTime = modem.getGSMDateTime(DATE_TIME); - DBG("GSM Time:", gsmTime); - String gsmDate = modem.getGSMDateTime(DATE_DATE); - DBG("GSM Date:", gsmDate); - - - modem.enableGPS(); - String gps_raw = modem.getGPSraw(); - modem.disableGPS(); - DBG("GPS raw data:", gps_raw); - - -#if defined(SMS_TARGET) - res = modem.sendSMS(SMS_TARGET, String("Hello from ") + imei); - DBG("SMS:", res ? "OK" : "fail"); - - // This is only supported on SIMxxx series - res = modem.sendSMS_UTF16(SMS_TARGET, u"Привіііт!", 9); - DBG("UTF16 SMS:", res ? "OK" : "fail"); -#endif - - modem.gprsDisconnect(); - if (!modem.isGprsConnected()) { - DBG("GPRS disconnected"); - } else { - DBG("GPRS disconnect: Failed."); - } -*/ - - // Try to power-off (modem may decide to restart automatically) - // To turn off modem completely, please use Reset/Enable pins - modem.poweroff(); - DBG("Poweroff."); - - // Do nothing forevermore - while (true) { - modem.maintain(); - } -} - -void powerOn() { - digitalWrite(MODEM_PWRKEY, LOW); - delay(100); - digitalWrite(MODEM_PWRKEY, HIGH); -} diff --git a/examples/SIM7000-ESP32/Diagnostics/Diagnostics.ino b/examples/SIM7000-ESP32/Diagnostics/Diagnostics.ino deleted file mode 100644 index f17b925..0000000 --- a/examples/SIM7000-ESP32/Diagnostics/Diagnostics.ino +++ /dev/null @@ -1,187 +0,0 @@ -/************************************************************** - * - * To run this tool you need StreamDebugger library: - * https://github.com/vshymanskyy/StreamDebugger - * or from http://librarymanager/all#StreamDebugger - * - * TinyGSM Getting Started guide: - * https://tiny.cc/tinygsm-readme - * - **************************************************************/ - -// Select your modem: -//#define TINY_GSM_MODEM_SIM800 -// #define TINY_GSM_MODEM_SIM808 -// #define TINY_GSM_MODEM_SIM900 -#define TINY_GSM_MODEM_SIM7000 -// #define TINY_GSM_MODEM_UBLOX -// #define TINY_GSM_MODEM_BG96 -// #define TINY_GSM_MODEM_A6 -// #define TINY_GSM_MODEM_A7 -// #define TINY_GSM_MODEM_M590 -// #define TINY_GSM_MODEM_ESP8266 -// #define TINY_GSM_MODEM_XBEE - -// Increase the buffer -#define TINY_GSM_RX_BUFFER 512 - -// Define the serial console for debug prints, if needed -//#define TINY_GSM_DEBUG Serial - -#include - -// Your GPRS credentials -// Leave empty, if missing user or pass -const char apn[] = "drei.at"; -const char user[] = ""; -const char pass[] = ""; - -// Set serial for debug console (to the Serial Monitor, speed 115200) -#define SerialMon Serial - -// Set serial for AT commands (to the module) -// Use Hardware Serial on Mega, Leonardo, Micro, Esp32 -#include "HardwareSerial.h" -#define SerialAT Serial2 - -// or Software Serial on Uno, Nano -//#include -//SoftwareSerial SerialAT(2, 3); // RX, TX - -#include -StreamDebugger debugger(SerialAT, SerialMon); -TinyGsm modem(debugger); - -const char server[] = "vsh.pp.ua"; -const char resource[] = "/TinyGSM/logo.txt"; - -const int port = 80; -TinyGsmClient client(modem); - -// For SSL: -//const int port = 443; -//TinyGsmClientSecure client(modem); - -void setup() { - // Set console baud rate - Serial.println("Starting Serial"); - SerialMon.begin(115200); - delay(10); - - // Set GSM module baud rate - SerialAT.begin(9600); - delay(3000); -} - -void loop() { - // Restart takes quite some time - // To skip it, call init() instead of restart() - SerialMon.print("Initializing modem..."); - if (!modem.restart()) { - SerialMon.println(F(" [fail]")); - SerialMon.println(F("************************")); - SerialMon.println(F(" Is your modem connected properly?")); - SerialMon.println(F(" Is your serial speed (baud rate) correct?")); - SerialMon.println(F(" Is your modem powered on?")); - SerialMon.println(F(" Do you use a good, stable power source?")); - SerialMon.println(F(" Try useing File -> Examples -> TinyGSM -> tools -> AT_Debug to find correct configuration")); - SerialMon.println(F("************************")); - delay(10000); - return; - } - SerialMon.println(F(" [OK]")); - - String modemInfo = modem.getModemInfo(); - SerialMon.print("Modem: "); - SerialMon.println(modemInfo); - - // Unlock your SIM card with a PIN - //modem.simUnlock("1234"); - - SerialMon.print("Waiting for network..."); - if (!modem.waitForNetwork()) { - SerialMon.println(F(" [fail]")); - SerialMon.println(F("************************")); - SerialMon.println(F(" Is your sim card locked?")); - SerialMon.println(F(" Do you have a good signal?")); - SerialMon.println(F(" Is antenna attached?")); - SerialMon.println(F(" Does the SIM card work with your phone?")); - SerialMon.println(F("************************")); - delay(10000); - return; - } - SerialMon.println(F(" [OK]")); - - SerialMon.print("Connecting to "); - SerialMon.print(apn); - if (!modem.gprsConnect(apn, user, pass)) { - SerialMon.println(F(" [fail]")); - SerialMon.println(F("************************")); - SerialMon.println(F(" Is GPRS enabled by network provider?")); - SerialMon.println(F(" Try checking your card balance.")); - SerialMon.println(F("************************")); - delay(10000); - return; - } - SerialMon.println(F(" [OK]")); - - IPAddress local = modem.localIP(); - SerialMon.print("Local IP: "); - SerialMon.println(local); - - SerialMon.print(F("Connecting to ")); - SerialMon.print(server); - if (!client.connect(server, port)) { - SerialMon.println(F(" [fail]")); - delay(10000); - return; - } - SerialMon.println(F(" [OK]")); - - // Make a HTTP GET request: - client.print(String("GET ") + resource + " HTTP/1.0\r\n"); - client.print(String("Host: ") + server + "\r\n"); - client.print("Connection: close\r\n\r\n"); - - // Wait for data to arrive - while (client.connected() && !client.available()) { - delay(100); - SerialMon.print('.'); - }; - SerialMon.println(); - - // Skip all headers - client.find("\r\n\r\n"); - - // Read data - unsigned long timeout = millis(); - unsigned long bytesReceived = 0; - while (client.connected() && millis() - timeout < 10000L) { - while (client.available()) { - char c = client.read(); - //SerialMon.print(c); - bytesReceived += 1; - timeout = millis(); - } - } - - client.stop(); - SerialMon.println(F("Server disconnected")); - - modem.gprsDisconnect(); - SerialMon.println(F("GPRS disconnected")); - - SerialMon.println(); - SerialMon.println(F("************************")); - SerialMon.print (F(" Received: ")); - SerialMon.print(bytesReceived); - SerialMon.println(F(" bytes")); - SerialMon.print (F(" Test: ")); - SerialMon.println((bytesReceived == 121) ? "PASSED" : "FAILED"); - SerialMon.println(F("************************")); - - // Do nothing forevermore - while (true) { - delay(1000); - } -} diff --git a/extras/AT Command Manuals/SIM800 Series_TCPIP_Application Note_V1.02.pdf b/extras/AT Command Manuals/SIM800 Series_TCPIP_Application Note_V1.02.pdf new file mode 100644 index 0000000..88e4588 Binary files /dev/null and b/extras/AT Command Manuals/SIM800 Series_TCPIP_Application Note_V1.02.pdf differ