Merge branch 'master' of https://github.com/vshymanskyy/TinyGSM

README.md

@@ -67,13 +67,15 @@ GPS/GNSS                     | ✔¹     | 🅧     | ◌¹        | 🅧   |
 - SIMCom SIM800 series (SIM800A, SIM800C, SIM800L, SIM800H, SIM808, SIM868)
 - SIMCom SIM900 series (SIM900A, SIM900D, SIM908, SIM968)
 - AI-Thinker A6, A6C, A7, A20
-- U-blox SARA U201 (*alpha*)
 - ESP8266 (AT commands interface, similar to GSM modems)
 - Digi XBee WiFi and Cellular (using XBee command mode)
 - Neoway M590
+- U-blox SARA U201 ***(alpha)***
+- Quectel BG96 ***(alpha)***
 
 ### Supported boards/modules
-- Arduino MKR GSM 1400 (*alpha*)
+- Arduino MKR GSM 1400 ***(alpha)***
+- RAK WisLTE ***(alpha)***
 - GPRSbee
 - Microduino GSM
 - Adafruit FONA (Mini Cellular GSM Breakout)
@@ -82,7 +84,8 @@ GPS/GNSS                     | ✔¹     | 🅧     | ◌¹        | 🅧   |
 - ... other modules, based on supported modems
 
 More modems may be supported later:
-- [ ] Quectel M10, M95, UG95
+- [ ] Quectel M10, M35, M95, UG95
+- [ ] Sequans Monarch LTE Cat M1/NB1
 - [ ] SIMCom SIM5320, SIM5360, SIM5216, SIM7xxx
 - [ ] Telit GL865
 - [ ] ZTE MG2639
@@ -114,6 +117,13 @@ If you have found TinyGSM to be useful in your work, research or company, please
      Send an ```AT``` command using [this sketch](tools/AT_Debug/AT_Debug.ino)
   4. Ensure that GSM antenna is firmly attached
   
+If you have any issues:
+
+  1. Read the whole README (you're looking at it!)
+  2. Try running the Diagnostics sketch
+  3. Check for [**highlighted topics here**](https://github.com/vshymanskyy/TinyGSM/issues?utf8=%E2%9C%93&q=is%3Aissue+label%3A%22for+reference%22+)
+  4. If you have a question, post it in [Gitter chat](https://gitter.im/tinygsm)
+
 ## How does it work?
 
 Many GSM modems, WiFi and radio modules can be controlled by sending AT commands over Serial.  
@@ -133,8 +143,9 @@ Use this sketch to diagnose your SIM card and GPRS connection:
   
 ### Ensure stable data & power connection
 
-This actually solves stability problems in **many** cases:
-- Provide a good, [stable power supply](https://github.com/vshymanskyy/TinyGSM/wiki/Powering-GSM-module) (up to 2A and specific voltage according to your module documentation)
+Most modules require up to 2A and specific voltage - according to the module documentation.
+So this actually solves stability problems in **many** cases:
+- Provide a good stable power supply. Read about [**powering your module**](https://github.com/vshymanskyy/TinyGSM/wiki/Powering-GSM-module).
 - Keep your wires as short as possible
 - Consider soldering them for a stable connection
 - Do not put your wires next to noisy signal sources (buck converters, antennas, oscillators etc.)
@@ -143,6 +154,7 @@ This actually solves stability problems in **many** cases:
 
 When using ```SoftwareSerial``` (on Uno, Nano, etc), the speed **115200** may not work.  
 Try selecting **57600**, **38400**, or even lower - the one that works best for you.  
+In some cases **9600** is unstable, but using **38400** helps, etc.  
 Be sure to set correct TX/RX pins in the sketch. Please note that not every Arduino pin can serve as TX or RX pin.  
 **Read more about SoftSerial options and configuration [here](https://www.pjrc.com/teensy/td_libs_AltSoftSerial.html) and [here](https://www.arduino.cc/en/Reference/SoftwareSerial).**
   

examples/AllFunctions/AllFunctions.ino

@@ -126,6 +126,12 @@ void loop() {
   String gsmLoc = modem.getGsmLocation();
   DBG("GSM location:", gsmLoc);
 
+  // This is only supported on SIMxxx series
+  String gsmTime = modem.getGSMDateTime(DATE_TIME);
+  DBG("GSM Time:", gsmTime);
+  String gsmDate = modem.getGSMDateTime(DATE_DATE);
+  DBG("GSM Date:", gsmDate);
+
   String ussd_balance = modem.sendUSSD("*111#");
   DBG("Balance (USSD):", ussd_balance);
 

keywords.txt

@@ -24,3 +24,6 @@ factoryReset	KEYWORD2
 #######################################
 # Literals (LITERAL1)
 #######################################
+DATE_FULL	LITERAL1
+DATE_TIME	LITERAL1
+DATE_DATE	LITERAL1

src/TinyGsmClientSIM800.h

@@ -39,6 +39,11 @@ enum RegStatus {
   REG_UNKNOWN      = 4,
 };
 
+enum DateTime {
+  DATE_FULL = 0,
+  DATE_TIME = 1,
+  DATE_DATE = 2
+};
 
 class TinyGsmSim800
 {
@@ -307,6 +312,13 @@ public:
     if (!testAT()) {
       return false;
     }
+    //Enable Local Time Stamp for getting network time
+    sendAT(GF("+CLTS=1"));
+    if (waitResponse(10000L) != 1) {
+      return false;
+    }
+    sendAT(GF("&W"));
+    waitResponse();
     sendAT(GF("+CFUN=0"));
     if (waitResponse(10000L) != 1) {
       return false;
@@ -719,6 +731,32 @@ public:
     return res;
   }
 
+  /*
+   * Time functions
+   */
+  String getGSMDateTime(DateTime format) {
+    sendAT(GF("+CCLK?"));
+    if (waitResponse(2000L, GF(GSM_NL "+CCLK: \"")) != 1) {
+      return "";
+    }
+    
+    String res;
+
+    switch(format) {
+      case DATE_FULL:
+        res = stream.readStringUntil('"');
+      break;
+      case DATE_TIME:
+        streamSkipUntil(',');
+        res = stream.readStringUntil('"');
+      break;
+      case DATE_DATE:
+        res = stream.readStringUntil(',');
+      break;
+    }
+    return res;
+  }
+
   /*
    * Battery functions
    */