/************************************************************** * * TinyGSM Getting Started guide: * http://tiny.cc/tiny-gsm-readme * * NOTE: * Some of the functions may be unavailable for your modem. * Just comment them out. * **************************************************************/ // Select your modem: #define TINY_GSM_MODEM_SIM800 // #define TINY_GSM_MODEM_SIM808 // #define TINY_GSM_MODEM_SIM900 // #define TINY_GSM_MODEM_A6 // #define TINY_GSM_MODEM_A7 // #define TINY_GSM_MODEM_M590 // Set serial for debug console (to the Serial Monitor, speed 115200) #define SerialMon Serial // Set serial for AT commands (to the module) // Use Hardware Serial on Mega, Leonardo, Micro #define SerialAT Serial1 // or Software Serial on Uno, Nano //#include //SoftwareSerial SerialAT(2, 3); // RX, TX //#define DUMP_AT_COMMANDS #define TINY_GSM_DEBUG SerialMon // Set phone numbers, if you want to test SMS and Calls //#define SMS_TARGET "+380xxxxxxxxx" //#define CALL_TARGET "+380xxxxxxxxx" // Your GPRS credentials // Leave empty, if missing user or pass const char apn[] = "YourAPN"; const char user[] = ""; const char pass[] = ""; #include #ifdef DUMP_AT_COMMANDS #include StreamDebugger debugger(SerialAT, SerialMon); TinyGsm modem(debugger); #else TinyGsm modem(SerialAT); #endif void setup() { // Set console baud rate SerialMon.begin(115200); delay(10); // Set your reset, enable, power pins here delay(3000); // Set GSM module baud rate TinyGsmAutoBaud(SerialAT); } void loop() { // Restart takes quite some time // To skip it, call init() instead of restart() DBG("Initializing modem..."); if (!modem.restart()) { delay(10000); return; } String modemInfo = modem.getModemInfo(); DBG("Modem:", modemInfo); // Unlock your SIM card with a PIN //modem.simUnlock("1234"); DBG("Waiting for network..."); if (!modem.waitForNetwork()) { delay(10000); return; } if (modem.isNetworkConnected()) { DBG("Network connected"); } DBG("Connecting to", apn); if (!modem.gprsConnect(apn, user, pass)) { delay(10000); return; } bool res; String ccid = modem.getSimCCID(); DBG("CCID:", ccid); String imei = modem.getIMEI(); DBG("IMEI:", imei); String cop = modem.getOperator(); DBG("Operator:", cop); IPAddress local = modem.localIP(); DBG("Local IP:", local); int csq = modem.getSignalQuality(); DBG("Signal quality:", csq); // This is NOT supported on M590 int battLevel = modem.getBattPercent(); DBG("Battery lavel:", battLevel); // This is only supported on SIMxxx series float battVoltage = modem.getBattVoltage() / 1000.0F; DBG("Battery voltage:", battVoltage); // This is only supported on SIMxxx series String gsmLoc = modem.getGsmLocation(); DBG("GSM location:", gsmLoc); // This is only supported on SIMxxx series String gsmTime = modem.getGSMDateTime(DATE_TIME); DBG("GSM Time:", gsmTime); String gsmDate = modem.getGSMDateTime(DATE_DATE); DBG("GSM Date:", gsmDate); String ussd_balance = modem.sendUSSD("*111#"); DBG("Balance (USSD):", ussd_balance); String ussd_phone_num = modem.sendUSSD("*161#"); DBG("Phone number (USSD):", ussd_phone_num); #if defined(TINY_GSM_MODEM_SIM808) modem.enableGPS(); String gps_raw = modem.getGPSraw(); modem.disableGPS(); DBG("GPS raw data:", gps_raw); #endif #if defined(SMS_TARGET) res = modem.sendSMS(SMS_TARGET, String("Hello from ") + imei); DBG("SMS:", res ? "OK" : "fail"); // This is only supported on SIMxxx series res = modem.sendSMS_UTF16(SMS_TARGET, u"Привіііт!", 9); DBG("UTF16 SMS:", res ? "OK" : "fail"); #endif #if defined(CALL_TARGET) DBG("Calling:", CALL_TARGET); // This is NOT supported on M590 res = modem.callNumber(CALL_TARGET); DBG("Call:", res ? "OK" : "fail"); if (res) { delay(1000L); // Play DTMF A, duration 1000ms modem.dtmfSend('A', 1000); // Play DTMF 0..4, default duration (100ms) for (char tone='0'; tone<='4'; tone++) { modem.dtmfSend(tone); } delay(5000); res = modem.callHangup(); DBG("Hang up:", res ? "OK" : "fail"); } #endif modem.gprsDisconnect(); if (!modem.isGprsConnected()) { DBG("GPRS disconnected"); } else { DBG("GPRS disconnect: Failed."); } // Try to power-off (modem may decide to restart automatically) // To turn off modem completely, please use Reset/Enable pins modem.poweroff(); DBG("Poweroff."); // Do nothing forevermore while (true) { modem.maintain(); } }