/**************************************************************
 *
 * For this example, you need to install CRC32 library:
 *   https://github.com/bakercp/CRC32
 *   or from http://librarymanager/all#CRC32+checksum
 *
 * TinyGSM Getting Started guide:
 *   http://tiny.cc/tiny-gsm-readme
 *
 * ATTENTION! Downloading big files requires of knowledge of
 * the TinyGSM internals and some modem specifics,
 * so this is for more experienced developers.
 *
 **************************************************************/

// Select your modem:
#define TINY_GSM_MODEM_SIM800
// #define TINY_GSM_MODEM_SIM900
// #define TINY_GSM_MODEM_SIM808
// #define TINY_GSM_MODEM_SIM868
// #define TINY_GSM_MODEM_UBLOX
// #define TINY_GSM_MODEM_M95
// #define TINY_GSM_MODEM_BG96
// #define TINY_GSM_MODEM_A6
// #define TINY_GSM_MODEM_A7
// #define TINY_GSM_MODEM_M590
// #define TINY_GSM_MODEM_MC60
// #define TINY_GSM_MODEM_MC60E
// #define TINY_GSM_MODEM_ESP8266
// #define TINY_GSM_MODEM_XBEE

// Increase RX buffer if needed
#define TINY_GSM_RX_BUFFER 1024

#include <TinyGsmClient.h>
#include <CRC32.h>

// Uncomment this if you want to see all AT commands
//#define DUMP_AT_COMMANDS

// Set serial for debug console (to the Serial Monitor, default speed 115200)
#define SerialMon Serial

// Use Hardware Serial on Mega, Leonardo, Micro
#define SerialAT Serial1

// or Software Serial on Uno, Nano
//#include <SoftwareSerial.h>
//SoftwareSerial SerialAT(2, 3); // RX, TX


// Your GPRS credentials
// Leave empty, if missing user or pass
const char apn[]  = "YourAPN";
const char user[] = "";
const char pass[] = "";

// Server details
const char server[] = "vsh.pp.ua";
const int  port = 80;

const char resource[]  = "/TinyGSM/test_1k.bin";
uint32_t knownCRC32    = 0x6f50d767;
uint32_t knownFileSize = 1024;   // In case server does not send it

#ifdef DUMP_AT_COMMANDS
  #include <StreamDebugger.h>
  StreamDebugger debugger(SerialAT, SerialMon);
  TinyGsm modem(debugger);
#else
  TinyGsm modem(SerialAT);
#endif

TinyGsmClient client(modem);

void setup() {
  // Set console baud rate
  SerialMon.begin(115200);
  delay(10);

  // Set GSM module baud rate
  SerialAT.begin(115200);
  delay(3000);

  // Restart takes quite some time
  // To skip it, call init() instead of restart()
  SerialMon.println(F("Initializing modem..."));
  modem.restart();

  String modemInfo = modem.getModemInfo();
  SerialMon.print(F("Modem: "));
  SerialMon.println(modemInfo);

  // Unlock your SIM card with a PIN
  //modem.simUnlock("1234");
}

void printPercent(uint32_t readLength, uint32_t contentLength) {
  // If we know the total length
  if (contentLength != -1) {
    SerialMon.print("\r ");
    SerialMon.print((100.0 * readLength) / contentLength);
    SerialMon.print('%');
  } else {
    SerialMon.println(readLength);
  }
}

void loop() {
  SerialMon.print(F("Waiting for network..."));
  if (!modem.waitForNetwork()) {
    SerialMon.println(" fail");
    delay(10000);
    return;
  }
  SerialMon.println(" OK");

  SerialMon.print(F("Connecting to "));
  SerialMon.print(apn);
  if (!modem.gprsConnect(apn, user, pass)) {
    SerialMon.println(" fail");
    delay(10000);
    return;
  }
  SerialMon.println(" OK");

  SerialMon.print(F("Connecting to "));
  SerialMon.print(server);
  if (!client.connect(server, port)) {
    SerialMon.println(" fail");
    delay(10000);
    return;
  }
  SerialMon.println(" OK");

  // Make a HTTP GET request:
  client.print(String("GET ") + resource + " HTTP/1.0\r\n");
  client.print(String("Host: ") + server + "\r\n");
  client.print("Connection: close\r\n\r\n");

  long timeout = millis();
  while (client.available() == 0) {
    if (millis() - timeout > 5000L) {
      SerialMon.println(F(">>> Client Timeout !"));
      client.stop();
      delay(10000L);
      return;
    }
  }

  SerialMon.println(F("Reading response header"));
  uint32_t contentLength = knownFileSize;

  while (client.available()) {
    String line = client.readStringUntil('\n');
    line.trim();
    //SerialMon.println(line);    // Uncomment this to show response header
    line.toLowerCase();
    if (line.startsWith("content-length:")) {
      contentLength = line.substring(line.lastIndexOf(':') + 1).toInt();
    } else if (line.length() == 0) {
      break;
    }
  }

  SerialMon.println(F("Reading response data"));
  timeout = millis();
  uint32_t readLength = 0;
  CRC32 crc;

  unsigned long timeElapsed = millis();
  printPercent(readLength, contentLength);
  while (readLength < contentLength && client.connected() && millis() - timeout < 10000L) {
    while (client.available()) {
      uint8_t c = client.read();
      //SerialMon.print((char)c);       // Uncomment this to show data
      crc.update(c);
      readLength++;
      if (readLength % (contentLength / 13) == 0) {
        printPercent(readLength, contentLength);
      }
      timeout = millis();
    }
  }
  printPercent(readLength, contentLength);
  timeElapsed = millis() - timeElapsed;
  SerialMon.println();

  // Shutdown

  client.stop();
  SerialMon.println(F("Server disconnected"));

  modem.gprsDisconnect();
  SerialMon.println(F("GPRS disconnected"));

  float duration = float(timeElapsed) / 1000;

  SerialMon.println();
  SerialMon.print("Content-Length: ");   SerialMon.println(contentLength);
  SerialMon.print("Actually read:  ");   SerialMon.println(readLength);
  SerialMon.print("Calc. CRC32:    0x"); SerialMon.println(crc.finalize(), HEX);
  SerialMon.print("Known CRC32:    0x"); SerialMon.println(knownCRC32, HEX);
  SerialMon.print("Duration:       ");   SerialMon.print(duration); SerialMon.println("s");

  // Do nothing forevermore
  while (true) {
    delay(1000);
  }
}