You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
77 lines
2.3 KiB
77 lines
2.3 KiB
/**************************************************************
|
|
*
|
|
* This script tries to auto-detect the baud rate
|
|
* and allows direct AT commands access
|
|
*
|
|
* TinyGSM Getting Started guide:
|
|
* http://tiny.cc/tiny-gsm-readme
|
|
*
|
|
**************************************************************/
|
|
|
|
// Set serial for debug console (to the Serial Monitor, speed 115200)
|
|
#define SerialMon Serial
|
|
|
|
// Set serial for AT commands (to the module)
|
|
// Use Hardware Serial on Mega, Leonardo, Micro
|
|
#define SerialAT Serial1
|
|
|
|
// or Software Serial on Uno, Nano
|
|
//#include <SoftwareSerial.h>
|
|
//SoftwareSerial SerialAT(2, 3); // RX, TX
|
|
|
|
#include <TinyGsmClient.h>
|
|
TinyGsm modem(SerialAT);
|
|
|
|
void setup() {
|
|
// Set console baud rate
|
|
SerialMon.begin(115200);
|
|
delay(5000);
|
|
}
|
|
|
|
void loop() {
|
|
// Detect module baud rate
|
|
uint32_t rate = 0;
|
|
uint32_t rates[] = { 115200, 9600, 57600, 19200, 74400, 74880 };
|
|
|
|
SerialMon.println("Autodetecting baud rate");
|
|
for (unsigned i = 0; i < sizeof(rates)/sizeof(rates[0]); i++) {
|
|
SerialMon.print(String("Trying baud rate ") + rates[i] + "... ");
|
|
SerialAT.begin(rates[i]);
|
|
delay(10);
|
|
if (modem.autoBaud(2000)) {
|
|
rate = rates[i];
|
|
SerialMon.println(F("OK"));
|
|
break;
|
|
} else {
|
|
SerialMon.println(F("fail"));
|
|
}
|
|
}
|
|
|
|
if (!rate) {
|
|
SerialMon.println(F("***********************************************************"));
|
|
SerialMon.println(F(" Module does not respond!"));
|
|
SerialMon.println(F(" Check your Serial wiring"));
|
|
SerialMon.println(F(" Check the module is correctly powered and turned on"));
|
|
SerialMon.println(F("***********************************************************"));
|
|
delay(30000L);
|
|
return;
|
|
}
|
|
|
|
// Access AT commands from Serial Monitor
|
|
SerialMon.println(F("***********************************************************"));
|
|
SerialMon.println(F(" You can now send AT commands"));
|
|
SerialMon.println(F(" Enter \"AT\" (without quotes), and you should see \"OK\""));
|
|
SerialMon.println(F(" If it doesn't work, select \"Both NL & CR\" in Serial Monitor"));
|
|
SerialMon.println(F("***********************************************************"));
|
|
|
|
while(true) {
|
|
if (SerialAT.available()) {
|
|
SerialMon.write(SerialAT.read());
|
|
}
|
|
if (SerialMon.available()) {
|
|
SerialAT.write(SerialMon.read());
|
|
}
|
|
delay(0);
|
|
}
|
|
}
|
|
|