You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
267 lines
7.0 KiB
267 lines
7.0 KiB
/**************************************************************
|
|
*
|
|
* For this example, you need to install PubSubClient library:
|
|
* https://github.com/knolleary/pubsubclient
|
|
* or from http://librarymanager/all#PubSubClient
|
|
*
|
|
* TinyGSM Getting Started guide:
|
|
* https://tiny.cc/tinygsm-readme
|
|
*
|
|
* For more MQTT examples, see PubSubClient library
|
|
*
|
|
**************************************************************
|
|
* Use Mosquitto client tools to work with MQTT
|
|
* Ubuntu/Linux: sudo apt-get install mosquitto-clients
|
|
* Windows: https://mosquitto.org/download/
|
|
*
|
|
* Subscribe for messages:
|
|
* mosquitto_sub -h test.mosquitto.org -t GsmClientTest/init -t GsmClientTest/ledStatus -q 1
|
|
* Toggle led:
|
|
* mosquitto_pub -h test.mosquitto.org -t GsmClientTest/led -q 1 -m "toggle"
|
|
*
|
|
* You can use Node-RED for wiring together MQTT-enabled devices
|
|
* https://nodered.org/
|
|
* Also, take a look at these additional Node-RED modules:
|
|
* node-red-contrib-blynk-ws
|
|
* node-red-dashboard
|
|
*
|
|
**************************************************************/
|
|
|
|
// Select your modem:
|
|
#define TINY_GSM_MODEM_SIM800
|
|
// #define TINY_GSM_MODEM_SIM808
|
|
// #define TINY_GSM_MODEM_SIM868
|
|
// #define TINY_GSM_MODEM_SIM900
|
|
// #define TINY_GSM_MODEM_SIM7000
|
|
// #define TINY_GSM_MODEM_SIM5360
|
|
// #define TINY_GSM_MODEM_SIM7600
|
|
// #define TINY_GSM_MODEM_UBLOX
|
|
// #define TINY_GSM_MODEM_SARAR4
|
|
// #define TINY_GSM_MODEM_M95
|
|
// #define TINY_GSM_MODEM_BG96
|
|
// #define TINY_GSM_MODEM_A6
|
|
// #define TINY_GSM_MODEM_A7
|
|
// #define TINY_GSM_MODEM_M590
|
|
// #define TINY_GSM_MODEM_MC60
|
|
// #define TINY_GSM_MODEM_MC60E
|
|
// #define TINY_GSM_MODEM_ESP8266
|
|
// #define TINY_GSM_MODEM_XBEE
|
|
// #define TINY_GSM_MODEM_SEQUANS_MONARCH
|
|
|
|
// Set serial for debug console (to the Serial Monitor, default speed 115200)
|
|
#define SerialMon Serial
|
|
|
|
// Set serial for AT commands (to the module)
|
|
// Use Hardware Serial on Mega, Leonardo, Micro
|
|
#define SerialAT Serial1
|
|
|
|
// or Software Serial on Uno, Nano
|
|
//#include <SoftwareSerial.h>
|
|
//SoftwareSerial SerialAT(2, 3); // RX, TX
|
|
|
|
// See all AT commands, if wanted
|
|
// #define DUMP_AT_COMMANDS
|
|
|
|
// Define the serial console for debug prints, if needed
|
|
#define TINY_GSM_DEBUG SerialMon
|
|
|
|
// Range to attempt to autobaud
|
|
#define GSM_AUTOBAUD_MIN 9600
|
|
#define GSM_AUTOBAUD_MAX 115200
|
|
|
|
// Add a reception delay - may be needed for a fast processor at a slow baud rate
|
|
// #define TINY_GSM_YIELD() { delay(2); }
|
|
|
|
// Define how you're planning to connect to the internet
|
|
#define TINY_GSM_USE_GPRS true
|
|
#define TINY_GSM_USE_WIFI false
|
|
|
|
// set GSM PIN, if any
|
|
#define GSM_PIN ""
|
|
|
|
// Your GPRS credentials, if any
|
|
const char apn[] = "YourAPN";
|
|
const char gprsUser[] = "";
|
|
const char gprsPass[] = "";
|
|
|
|
// Your WiFi connection credentials, if applicable
|
|
const char wifiSSID[] = "YourSSID";
|
|
const char wifiPass[] = "YourWiFiPass";
|
|
|
|
// MQTT details
|
|
const char* broker = "broker.hivemq.com";
|
|
|
|
const char* topicLed = "GsmClientTest/led";
|
|
const char* topicInit = "GsmClientTest/init";
|
|
const char* topicLedStatus = "GsmClientTest/ledStatus";
|
|
|
|
#include <TinyGsmClient.h>
|
|
#include <PubSubClient.h>
|
|
|
|
// Just in case someone defined the wrong thing..
|
|
#if TINY_GSM_USE_GPRS && not defined TINY_GSM_MODEM_HAS_GPRS
|
|
#undef TINY_GSM_USE_GPRS
|
|
#undef TINY_GSM_USE_WIFI
|
|
#define TINY_GSM_USE_GPRS false
|
|
#define TINY_GSM_USE_WIFI true
|
|
#endif
|
|
#if TINY_GSM_USE_WIFI && not defined TINY_GSM_MODEM_HAS_WIFI
|
|
#undef TINY_GSM_USE_GPRS
|
|
#undef TINY_GSM_USE_WIFI
|
|
#define TINY_GSM_USE_GPRS true
|
|
#define TINY_GSM_USE_WIFI false
|
|
#endif
|
|
|
|
#ifdef DUMP_AT_COMMANDS
|
|
#include <StreamDebugger.h>
|
|
StreamDebugger debugger(SerialAT, SerialMon);
|
|
TinyGsm modem(debugger);
|
|
#else
|
|
TinyGsm modem(SerialAT);
|
|
#endif
|
|
TinyGsmClient client(modem);
|
|
PubSubClient mqtt(client);
|
|
|
|
#define LED_PIN 13
|
|
int ledStatus = LOW;
|
|
|
|
uint32_t lastReconnectAttempt = 0;
|
|
|
|
void mqttCallback(char* topic, byte* payload, unsigned int len) {
|
|
SerialMon.print("Message arrived [");
|
|
SerialMon.print(topic);
|
|
SerialMon.print("]: ");
|
|
SerialMon.write(payload, len);
|
|
SerialMon.println();
|
|
|
|
// Only proceed if incoming message's topic matches
|
|
if (String(topic) == topicLed) {
|
|
ledStatus = !ledStatus;
|
|
digitalWrite(LED_PIN, ledStatus);
|
|
mqtt.publish(topicLedStatus, ledStatus ? "1" : "0");
|
|
}
|
|
}
|
|
|
|
boolean mqttConnect() {
|
|
SerialMon.print("Connecting to ");
|
|
SerialMon.print(broker);
|
|
|
|
// Connect to MQTT Broker
|
|
boolean status = mqtt.connect("GsmClientTest");
|
|
|
|
// Or, if you want to authenticate MQTT:
|
|
//boolean status = mqtt.connect("GsmClientName", "mqtt_user", "mqtt_pass");
|
|
|
|
if (status == false) {
|
|
SerialMon.println(" fail");
|
|
return false;
|
|
}
|
|
SerialMon.println(" success");
|
|
mqtt.publish(topicInit, "GsmClientTest started");
|
|
mqtt.subscribe(topicLed);
|
|
return mqtt.connected();
|
|
}
|
|
|
|
|
|
void setup() {
|
|
// Set console baud rate
|
|
SerialMon.begin(115200);
|
|
delay(10);
|
|
|
|
pinMode(LED_PIN, OUTPUT);
|
|
|
|
// !!!!!!!!!!!
|
|
// Set your reset, enable, power pins here
|
|
// !!!!!!!!!!!
|
|
|
|
SerialMon.println("Wait...");
|
|
|
|
// Set GSM module baud rate
|
|
// TinyGsmAutoBaud(SerialAT,GSM_AUTOBAUD_MIN,GSM_AUTOBAUD_MAX);
|
|
SerialAT.begin(9600);
|
|
delay(3000);
|
|
|
|
// Restart takes quite some time
|
|
// To skip it, call init() instead of restart()
|
|
SerialMon.println("Initializing modem...");
|
|
modem.restart();
|
|
// modem.init();
|
|
|
|
String modemInfo = modem.getModemInfo();
|
|
SerialMon.print("Modem Info: ");
|
|
SerialMon.println(modemInfo);
|
|
|
|
#if TINY_GSM_USE_GPRS
|
|
// Unlock your SIM card with a PIN if needed
|
|
if ( GSM_PIN && modem.getSimStatus() != 3 ) {
|
|
modem.simUnlock(GSM_PIN);
|
|
}
|
|
#endif
|
|
|
|
#if TINY_GSM_USE_WIFI
|
|
// Wifi connection parameters must be set before waiting for the network
|
|
SerialMon.print(F("Setting SSID/password..."));
|
|
if (!modem.networkConnect(wifiSSID, wifiPass)) {
|
|
SerialMon.println(" fail");
|
|
delay(10000);
|
|
return;
|
|
}
|
|
SerialMon.println(" success");
|
|
#endif
|
|
|
|
#if TINY_GSM_USE_GPRS && defined TINY_GSM_MODEM_XBEE
|
|
// The XBee must run the gprsConnect function BEFORE waiting for network!
|
|
modem.gprsConnect(apn, gprsUser, gprsPass);
|
|
#endif
|
|
|
|
SerialMon.print("Waiting for network...");
|
|
if (!modem.waitForNetwork()) {
|
|
SerialMon.println(" fail");
|
|
delay(10000);
|
|
return;
|
|
}
|
|
SerialMon.println(" success");
|
|
|
|
if (modem.isNetworkConnected()) {
|
|
SerialMon.println("Network connected");
|
|
}
|
|
|
|
#if TINY_GSM_USE_GPRS
|
|
// GPRS connection parameters are usually set after network registration
|
|
SerialMon.print(F("Connecting to "));
|
|
SerialMon.print(apn);
|
|
if (!modem.gprsConnect(apn, gprsUser, gprsPass)) {
|
|
SerialMon.println(" fail");
|
|
delay(10000);
|
|
return;
|
|
}
|
|
SerialMon.println(" success");
|
|
|
|
if (modem.isGprsConnected()) {
|
|
SerialMon.println("GPRS connected");
|
|
}
|
|
#endif
|
|
|
|
// MQTT Broker setup
|
|
mqtt.setServer(broker, 1883);
|
|
mqtt.setCallback(mqttCallback);
|
|
}
|
|
|
|
void loop() {
|
|
|
|
if (!mqtt.connected()) {
|
|
SerialMon.println("=== MQTT NOT CONNECTED ===");
|
|
// Reconnect every 10 seconds
|
|
uint32_t t = millis();
|
|
if (t - lastReconnectAttempt > 10000L) {
|
|
lastReconnectAttempt = t;
|
|
if (mqttConnect()) {
|
|
lastReconnectAttempt = 0;
|
|
}
|
|
}
|
|
delay(100);
|
|
return;
|
|
}
|
|
|
|
mqtt.loop();
|
|
}
|