JSD
/
TinyGSM_Senseright


								/**************************************************************

								 *

								 * To run this tool you need StreamDebugger library:

								 *   https://github.com/vshymanskyy/StreamDebugger

								 *   or from http://librarymanager/all#StreamDebugger

								 *

								 * TinyGSM Getting Started guide:

								 *   http://tiny.cc/tiny-gsm-readme

								 *

								 **************************************************************/


								// Select your modem:

								#define TINY_GSM_MODEM_SIM800

								// #define TINY_GSM_MODEM_SIM808

								// #define TINY_GSM_MODEM_SIM900

								// #define TINY_GSM_MODEM_UBLOX

								// #define TINY_GSM_MODEM_BG96

								// #define TINY_GSM_MODEM_A6

								// #define TINY_GSM_MODEM_A7

								// #define TINY_GSM_MODEM_M590

								// #define TINY_GSM_MODEM_ESP8266

								// #define TINY_GSM_MODEM_XBEE


								// Increase the buffer

								#define TINY_GSM_RX_BUFFER 512


								// Define the serial console for debug prints, if needed

								//#define TINY_GSM_DEBUG Serial


								#include <TinyGsmClient.h>


								// Your GPRS credentials

								// Leave empty, if missing user or pass

								const char apn[]  = "YourAPN";

								const char user[] = "";

								const char pass[] = "";


								// Set serial for debug console (to the Serial Monitor, speed 115200)

								#define SerialMon Serial


								// Set serial for AT commands (to the module)

								// Use Hardware Serial on Mega, Leonardo, Micro

								#define SerialAT Serial1


								// or Software Serial on Uno, Nano

								//#include <SoftwareSerial.h>

								//SoftwareSerial SerialAT(2, 3); // RX, TX


								#include <StreamDebugger.h>

								StreamDebugger debugger(SerialAT, SerialMon);

								TinyGsm modem(debugger);


								const char server[] = "vsh.pp.ua";

								const char resource[] = "/TinyGSM/logo.txt";


								const int  port = 80;

								TinyGsmClient client(modem);


								// For SSL:

								//const int  port = 443;

								//TinyGsmClientSecure client(modem);


								void setup() {

								  // Set console baud rate

								  SerialMon.begin(115200);

								  delay(10);


								  // Set GSM module baud rate

								  SerialAT.begin(115200);

								  delay(3000);

								}


								void loop() {

								  // Restart takes quite some time

								  // To skip it, call init() instead of restart()

								  SerialMon.print("Initializing modem...");

								  if (!modem.restart()) {

								    SerialMon.println(F(" [fail]"));

								    SerialMon.println(F("************************"));

								    SerialMon.println(F(" Is your modem connected properly?"));

								    SerialMon.println(F(" Is your serial speed (baud rate) correct?"));

								    SerialMon.println(F(" Is your modem powered on?"));

								    SerialMon.println(F(" Do you use a good, stable power source?"));

								    SerialMon.println(F(" Try useing File -> Examples -> TinyGSM -> tools -> AT_Debug to find correct configuration"));

								    SerialMon.println(F("************************"));

								    delay(10000);

								    return;

								  }

								  SerialMon.println(F(" [OK]"));


								  String modemInfo = modem.getModemInfo();

								  SerialMon.print("Modem: ");

								  SerialMon.println(modemInfo);


								  // Unlock your SIM card with a PIN

								  //modem.simUnlock("1234");


								  SerialMon.print("Waiting for network...");

								  if (!modem.waitForNetwork()) {

								    SerialMon.println(F(" [fail]"));

								    SerialMon.println(F("************************"));

								    SerialMon.println(F(" Is your sim card locked?"));

								    SerialMon.println(F(" Do you have a good signal?"));

								    SerialMon.println(F(" Is antenna attached?"));

								    SerialMon.println(F(" Does the SIM card work with your phone?"));

								    SerialMon.println(F("************************"));

								    delay(10000);

								    return;

								  }

								  SerialMon.println(F(" [OK]"));


								  SerialMon.print("Connecting to ");

								  SerialMon.print(apn);

								  if (!modem.gprsConnect(apn, user, pass)) {

								    SerialMon.println(F(" [fail]"));

								    SerialMon.println(F("************************"));

								    SerialMon.println(F(" Is GPRS enabled by network provider?"));

								    SerialMon.println(F(" Try checking your card balance."));

								    SerialMon.println(F("************************"));

								    delay(10000);

								    return;

								  }

								  SerialMon.println(F(" [OK]"));


								  IPAddress local = modem.localIP();

								  SerialMon.print("Local IP: ");

								  SerialMon.println(local);


								  SerialMon.print(F("Connecting to "));

								  SerialMon.print(server);

								  if (!client.connect(server, port)) {

								    SerialMon.println(F(" [fail]"));

								    delay(10000);

								    return;

								  }

								  SerialMon.println(F(" [OK]"));


								  // Make a HTTP GET request:

								  client.print(String("GET ") + resource + " HTTP/1.0\r\n");

								  client.print(String("Host: ") + server + "\r\n");

								  client.print("Connection: close\r\n\r\n");


								  // Wait for data to arrive

								  while (client.connected() && !client.available()) {

								    delay(100);

								    SerialMon.print('.');

								  };

								  SerialMon.println();


								  // Skip all headers

								  client.find("\r\n\r\n");


								  // Read data

								  unsigned long timeout = millis();

								  unsigned long bytesReceived = 0;

								  while (client.connected() && millis() - timeout < 10000L) {

								    while (client.available()) {

								      char c = client.read();

								      //SerialMon.print(c);

								      bytesReceived += 1;

								      timeout = millis();

								    }

								  }


								  client.stop();

								  SerialMon.println(F("Server disconnected"));


								  modem.gprsDisconnect();

								  SerialMon.println(F("GPRS disconnected"));


								  SerialMon.println();

								  SerialMon.println(F("************************"));

								  SerialMon.print  (F(" Received: "));

								  SerialMon.print(bytesReceived);

								  SerialMon.println(F(" bytes"));

								  SerialMon.print  (F(" Test:     "));

								  SerialMon.println((bytesReceived == 121) ? "PASSED" : "FAILED");

								  SerialMon.println(F("************************"));


								  // Do nothing forevermore

								  while (true) {

								    delay(1000);

								  }

								}