Add 'settings.json'

settings.json

@@ -0,0 +1,40 @@
+{
+  "mac_address": "10:52:1c:51:0e:84",? The device knows this anyway
+  "name": "Industrial",? This is managed at the server is it not?
+  "pcb_version": "4.0",? Why does the firmware need to know this?
+  "analogue_ports": 4,? Same as above, we will only push the correct number of sensor settings to the board.
+  "digital_ports": 2,? ""
+  "adc": "ADC128S022",? Won't the below adc settings take care of this?
+  "adc_miso": 19,
+  "adc_mosi": 23,
+  "adc_clk": 18,
+  "adc_cs": 5,
+  "upload_interval": 15,
+  "address": "mqtt.senseright.com.au",
+  "port": 1884,
+  "ota_path": null,
+  "mqtt_secondary_address": "mqtt.senseright.com.au",
+  "mqtt_secondary_port": 1884,
+  "sensors": [ ! We need to sit down and define what settings and naming we are using for all our current sensors so this is fully defined.
+    {
+      "port_type": "Analogue", ! This will define how and what settings we look for below. 
+      "port": 1,
+      "sensor_type": "0-5m pressure transducer", ! This should be a lot shorter as we will use this for control flow. For example "Pressure1", we would just keep a list of what key means what device.
+      "sensor_address": null,
+      "read_interval": 15,
+      "communication_type": "4-20mA", ? Does this change how we should read the device
+      "daughterboard": "4-20", ? ""
+      "pcb_version": "1.0" ? ""
+    },
+    {
+      "port_type": "Analogue",
+      "port": 2,
+      "sensor_type": "0-5m pressure transducer",
+      "sensor_address": null,
+      "read_interval": 15,
+      "communication_type": "4-20mA",
+      "daughterboard": "4-20",
+      "pcb_version": "1.0"
+    }
+  ]
+}