Minor example update

examples/AllFunctions/AllFunctions.ino

@@ -10,11 +10,13 @@
  **************************************************************/
 
 // Select your modem:
-//#define TINY_GSM_MODEM_SIM800
+#define TINY_GSM_MODEM_SIM800
 // #define TINY_GSM_MODEM_SIM808
+// #define TINY_GSM_MODEM_SIM868
 // #define TINY_GSM_MODEM_SIM900
-#define TINY_GSM_MODEM_SIM7000
+// #define TINY_GSM_MODEM_SIM7000
 // #define TINY_GSM_MODEM_UBLOX
+// #define TINY_GSM_MODEM_SARAR4
 // #define TINY_GSM_MODEM_M95
 // #define TINY_GSM_MODEM_BG96
 // #define TINY_GSM_MODEM_A6
@@ -24,8 +26,9 @@
 // #define TINY_GSM_MODEM_MC60E
 // #define TINY_GSM_MODEM_ESP8266
 // #define TINY_GSM_MODEM_XBEE
+// #define TINY_GSM_MODEM_SEQUANS_MONARCH
 
-// Set serial for debug console (to the Serial Monitor, speed 115200)
+// Set serial for debug console (to the Serial Monitor, default speed 115200)
 #define SerialMon Serial
 
 // Set serial for AT commands (to the module)
@@ -36,10 +39,13 @@
 //#include <SoftwareSerial.h>
 //SoftwareSerial SerialAT(2, 3); // RX, TX
 
-
+// See all AT commands, if wanted
 //#define DUMP_AT_COMMANDS
+
+// See the debugging, if wanted
 #define TINY_GSM_DEBUG SerialMon
 
+// Range to attempt to autobaud
 #define GSM_AUTOBAUD_MIN 9600
 #define GSM_AUTOBAUD_MAX 38400
 
@@ -47,6 +53,7 @@
  * Test enabled
  */
 #define TINY_GSM_USE_GPRS true
+#define TINY_GSM_USE_WIFI false
 #define TINY_GSM_USE_CALL true
 #define TINY_GSM_USE_SMS true
 #define TINY_GSM_USE_USSD true
@@ -65,6 +72,8 @@
 const char apn[]  = "YourAPN";
 const char user[] = "";
 const char pass[] = "";
+const char wifiSSID[]  = "YourSSID";
+const char wifiPass[] = "SSIDpw";
 
 #include <TinyGsmClient.h>
 
@@ -82,11 +91,18 @@ void setup() {
   delay(10);
 
   // Set your reset, enable, power pins here
+  pinMode(20, OUTPUT);
+  digitalWrite(20, HIGH);
+
+  pinMode(23, OUTPUT);
+  digitalWrite(23, HIGH);
 
+  DBG("Wait...");
   delay(3000);
 
   // Set GSM module baud rate
   TinyGsmAutoBaud(SerialAT,GSM_AUTOBAUD_MIN,GSM_AUTOBAUD_MAX);
+  // SerialAT.begin(9600);
 }
 
 void loop() {
@@ -111,6 +127,16 @@ void loop() {
     modem.simUnlock(GSM_PIN);
   }
 
+#if TINY_GSM_USE_WIFI
+  SerialMon.print(F("Setting SSID/password..."));
+  if (!modem.networkConnect(wifiSSID, wifiPass)) {
+    SerialMon.println(" fail");
+    delay(10000);
+    return;
+  }
+  SerialMon.println(" OK");
+#endif
+
   DBG("Waiting for network...");
   if (!modem.waitForNetwork()) {
     delay(10000);
@@ -221,6 +247,11 @@ void loop() {
   }
 #endif
 
+#if TINY_GSM_USE_WIFI
+  modem.networkDisconnect();
+  DBG("WiFi disconnected");
+#endif
+
 #if TINY_GSM_POWERDOWN
   // Try to power-off (modem may decide to restart automatically)
   // To turn off modem completely, please use Reset/Enable pins

examples/BlynkClient/BlynkClient.ino

@@ -30,11 +30,12 @@
 
 // Select your modem:
 #define TINY_GSM_MODEM_SIM800
-// #define TINY_GSM_MODEM_SIM900
 // #define TINY_GSM_MODEM_SIM808
 // #define TINY_GSM_MODEM_SIM868
+// #define TINY_GSM_MODEM_SIM900
 // #define TINY_GSM_MODEM_SIM7000
 // #define TINY_GSM_MODEM_UBLOX
+// #define TINY_GSM_MODEM_SARAR4
 // #define TINY_GSM_MODEM_M95
 // #define TINY_GSM_MODEM_BG96
 // #define TINY_GSM_MODEM_A6
@@ -44,6 +45,7 @@
 // #define TINY_GSM_MODEM_MC60E
 // #define TINY_GSM_MODEM_ESP8266
 // #define TINY_GSM_MODEM_XBEE
+// #define TINY_GSM_MODEM_SEQUANS_MONARCH
 
 #include <TinyGsmClient.h>
 #include <BlynkSimpleSIM800.h>

examples/FileDownload/FileDownload.ino

@@ -15,11 +15,12 @@
 
 // Select your modem:
 #define TINY_GSM_MODEM_SIM800
-// #define TINY_GSM_MODEM_SIM900
 // #define TINY_GSM_MODEM_SIM808
 // #define TINY_GSM_MODEM_SIM868
+// #define TINY_GSM_MODEM_SIM900
 // #define TINY_GSM_MODEM_SIM7000
 // #define TINY_GSM_MODEM_UBLOX
+// #define TINY_GSM_MODEM_SARAR4
 // #define TINY_GSM_MODEM_M95
 // #define TINY_GSM_MODEM_BG96
 // #define TINY_GSM_MODEM_A6
@@ -29,6 +30,7 @@
 // #define TINY_GSM_MODEM_MC60E
 // #define TINY_GSM_MODEM_ESP8266
 // #define TINY_GSM_MODEM_XBEE
+// #define TINY_GSM_MODEM_SEQUANS_MONARCH
 
 // Increase RX buffer if needed
 #define TINY_GSM_RX_BUFFER 1024

examples/HttpClient/HttpClient.ino

@@ -19,11 +19,12 @@
 
 // Select your modem:
 #define TINY_GSM_MODEM_SIM800
-// #define TINY_GSM_MODEM_SIM900
 // #define TINY_GSM_MODEM_SIM808
 // #define TINY_GSM_MODEM_SIM868
+// #define TINY_GSM_MODEM_SIM900
 // #define TINY_GSM_MODEM_SIM7000
 // #define TINY_GSM_MODEM_UBLOX
+// #define TINY_GSM_MODEM_SARAR4
 // #define TINY_GSM_MODEM_M95
 // #define TINY_GSM_MODEM_BG96
 // #define TINY_GSM_MODEM_A6
@@ -32,6 +33,8 @@
 // #define TINY_GSM_MODEM_MC60
 // #define TINY_GSM_MODEM_MC60E
 // #define TINY_GSM_MODEM_ESP8266
+// #define TINY_GSM_MODEM_XBEE
+// #define TINY_GSM_MODEM_SEQUANS_MONARCH
 
 // Increase RX buffer to capture the entire response
 // Chips without internal buffering (A6/A7, ESP8266, M590)

examples/HttpsClient/HttpsClient.ino

@@ -21,6 +21,7 @@
 // #define TINY_GSM_MODEM_SIM808
 // #define TINY_GSM_MODEM_SIM868
 // #define TINY_GSM_MODEM_UBLOX
+// #define TINY_GSM_MODEM_SARAR4
 // #define TINY_GSM_MODEM_ESP8266
 
 // Increase RX buffer to capture the entire response

examples/MqttClient/MqttClient.ino

@@ -29,11 +29,12 @@
 
 // Select your modem:
 #define TINY_GSM_MODEM_SIM800
-// #define TINY_GSM_MODEM_SIM900
 // #define TINY_GSM_MODEM_SIM808
 // #define TINY_GSM_MODEM_SIM868
+// #define TINY_GSM_MODEM_SIM900
 // #define TINY_GSM_MODEM_SIM7000
 // #define TINY_GSM_MODEM_UBLOX
+// #define TINY_GSM_MODEM_SARAR4
 // #define TINY_GSM_MODEM_M95
 // #define TINY_GSM_MODEM_BG96
 // #define TINY_GSM_MODEM_A6
@@ -43,6 +44,7 @@
 // #define TINY_GSM_MODEM_MC60E
 // #define TINY_GSM_MODEM_ESP8266
 // #define TINY_GSM_MODEM_XBEE
+// #define TINY_GSM_MODEM_SEQUANS_MONARCH
 
 #include <TinyGsmClient.h>
 #include <PubSubClient.h>

examples/WebClient/WebClient.ino

@@ -10,11 +10,12 @@
 
 // Select your modem:
 #define TINY_GSM_MODEM_SIM800
-// #define TINY_GSM_MODEM_SIM900
 // #define TINY_GSM_MODEM_SIM808
 // #define TINY_GSM_MODEM_SIM868
+// #define TINY_GSM_MODEM_SIM900
 // #define TINY_GSM_MODEM_SIM7000
 // #define TINY_GSM_MODEM_UBLOX
+// #define TINY_GSM_MODEM_SARAR4
 // #define TINY_GSM_MODEM_M95
 // #define TINY_GSM_MODEM_BG96
 // #define TINY_GSM_MODEM_A6
@@ -24,21 +25,13 @@
 // #define TINY_GSM_MODEM_MC60E
 // #define TINY_GSM_MODEM_ESP8266
 // #define TINY_GSM_MODEM_XBEE
+// #define TINY_GSM_MODEM_SEQUANS_MONARCH
 
 // Increase RX buffer if needed
-//#define TINY_GSM_RX_BUFFER 512
-
-// See the debugging, if wanted
-//#define TINY_GSM_DEBUG Serial
-//#define LOGGING
+#define TINY_GSM_RX_BUFFER 512
 
 // Add a reception delay, if needed
-//#define TINY_GSM_YIELD() { delay(1); }
-
-#include <TinyGsmClient.h>
-
-// Uncomment this if you want to see all AT commands
-//#define DUMP_AT_COMMANDS
+#define TINY_GSM_YIELD() { delay(1); }
 
 // Uncomment this if you want to use SSL
 //#define USE_SSL
@@ -46,6 +39,7 @@
 // Set serial for debug console (to the Serial Monitor, default speed 115200)
 #define SerialMon Serial
 
+// Set serial for AT commands (to the module)
 // Use Hardware Serial on Mega, Leonardo, Micro
 #define SerialAT Serial1
 
@@ -53,6 +47,21 @@
 //#include <SoftwareSerial.h>
 //SoftwareSerial SerialAT(2, 3); // RX, TX
 
+// See all AT commands, if wanted
+//#define DUMP_AT_COMMANDS
+
+// See the debugging, if wanted
+#define TINY_GSM_DEBUG SerialMon
+
+// Range to attempt to autobaud
+#define GSM_AUTOBAUD_MIN 9600
+#define GSM_AUTOBAUD_MAX 38400
+
+#define TINY_GSM_USE_GPRS true
+#define TINY_GSM_USE_WIFI false
+
+// set GSM PIN, if any
+#define GSM_PIN ""
 
 // Your GPRS credentials
 // Leave empty, if missing user or pass
@@ -66,6 +75,8 @@ const char wifiPass[] = "SSIDpw";
 const char server[] = "vsh.pp.ua";
 const char resource[] = "/TinyGSM/logo.txt";
 
+#include <TinyGsmClient.h>
+
 #ifdef DUMP_AT_COMMANDS
   #include <StreamDebugger.h>
   StreamDebugger debugger(SerialAT, SerialMon);
@@ -86,22 +97,28 @@ void setup() {
   // Set console baud rate
   SerialMon.begin(115200);
   delay(10);
-  SerialMon.println(F("Wait..."));
+
+  // Set your reset, enable, power pins here
+  pinMode(20, OUTPUT);
+  digitalWrite(20, HIGH);
 
   pinMode(23, OUTPUT);
-  digitalWrite(23, LOW);
+  digitalWrite(23, HIGH);
+
+  SerialMon.println("Wait...");
+  delay(3000);
 
   // Set GSM module baud rate
+  // TinyGsmAutoBaud(SerialAT,GSM_AUTOBAUD_MIN,GSM_AUTOBAUD_MAX);
   SerialAT.begin(9600);
-  delay(3000);
 
   // Restart takes quite some time
   // To skip it, call init() instead of restart()
-  SerialMon.println(F("Initializing modem..."));
+  SerialMon.println("Initializing modem...");
   modem.restart();
 
   String modemInfo = modem.getModemInfo();
-  SerialMon.print(F("Modem: "));
+  SerialMon.print("Modem: ");
   SerialMon.println(modemInfo);
 
   // Unlock your SIM card with a PIN
@@ -110,34 +127,27 @@ void setup() {
 
 void loop() {
 
-  if (modem.hasWifi()) {
-    SerialMon.print(F("Setting SSID/password..."));
-    if (!modem.networkConnect(wifiSSID, wifiPass)) {
-      SerialMon.println(" fail");
-      delay(10000);
-      return;
-    }
-    SerialMon.println(" OK");
-  }
-  else if (modem.getModemName().indexOf("XBee") >= 0) {
-    SerialMon.print(F("Setting APN"));
-    if (!modem.gprsConnect(apn)) {
-      SerialMon.println(" fail");
-      delay(10000);
-      return;
-    }
-    SerialMon.println(" OK");
+#if TINY_GSM_USE_WIFI
+  SerialMon.print(F("Setting SSID/password..."));
+  if (!modem.networkConnect(wifiSSID, wifiPass)) {
+    SerialMon.println(" fail");
+    delay(10000);
+    return;
   }
+  SerialMon.println(" OK");
+#endif
 
-  SerialMon.print(F("Waiting for network..."));
+  SerialMon.print("Waiting for network...");
   if (!modem.waitForNetwork()) {
-    SerialMon.println(" fail");
     delay(10000);
     return;
   }
-  SerialMon.println(" OK");
 
-  if (modem.hasGPRS()) {
+  if (modem.isNetworkConnected()) {
+    SerialMon.print("Network connected");
+  }
+
+#if TINY_GSM_USE_GPRS
     SerialMon.print(F("Connecting to "));
     SerialMon.print(apn);
     if (!modem.gprsConnect(apn, gprsUser, gprsPass)) {
@@ -146,9 +156,9 @@ void loop() {
       return;
     }
     SerialMon.println(" OK");
-  }
+#endif
 
-  SerialMon.print(F("Connecting to "));
+  SerialMon.print("Connecting to ");
   SerialMon.print(server);
   if (!client.connect(server, port)) {
     SerialMon.println(" fail");
@@ -178,14 +188,14 @@ void loop() {
   client.stop();
   SerialMon.println(F("Server disconnected"));
 
-  if (modem.hasWifi()) {
+#if TINY_GSM_USE_WIFI
     modem.networkDisconnect();
     SerialMon.println(F("WiFi disconnected"));
-  }
-  else {
+#endif
+#if TINY_GSM_USE_GPRS
     modem.gprsDisconnect();
     SerialMon.println(F("GPRS disconnected"));
-  }
+#endif
 
   // Do nothing forevermore
   while (true) {

src/TinyGsmClient.h

@@ -52,7 +52,7 @@
   #define TINY_GSM_MODEM_HAS_GPRS
   #define TINY_GSM_MODEM_HAS_SSL
   #include <TinyGsmClientSaraR4.h>
-  typedef TinyGsmUBLOX TinyGsm;
+  typedef TinyGsmSaraR4 TinyGsm;
   typedef TinyGsmSaraR4::GsmClient TinyGsmClient;
   typedef TinyGsmSaraR4::GsmClientSecure TinyGsmClientSecure;